Teja Panel

Teja Sandwich Panels for Roof Systems

The Hiansa TEJA panel consists of an exterior sheet that resembles a classic tiled roof, which gives the panel an attractive appearance.

This panel has an urban-style design and is recommended for homes, country buildings and single-family houses with roof slopes of at least 10%.

The Teja panel is quick and easy to install.
Lightweight and easy to maintain.
Great variety of finishes.
Interior finish in imitation wood.

Teja sandwich panel manufacturers

As Teja sandwich panel manufacturers, we carry out a securing scheme. To do this, first of all, the most suitable screw must be chosen according to the material that conforms to that structure. Normally, the panel is mounted on metal structures, wood or concrete (or even a combination of these).

This screw must be accompanied by a watertight washer to prevent water from seeping through the hole generated during installation. This washer is usually made of neoprene or EPDM and has a metallic top coating that makes it more durable against different types of weather.

We will place at least one screw on each side of the longitudinal overlap between panels that line up with the structure’s purlin. In this way we will have each panel secured with at least 2 securing systems on each purlin.

Once the screws have been placed, any residue from steel shavings must be carefully cleaned and removed from the surface to prevent them from rusting and affecting the aesthetic appearance of the panels and/or finishes.

We have Teja sandwich panels in our factory

We are manufacturers of Teja sandwich panels. The packages of panels must always be shipped covered with awning or in a closed container, on a flat surface and perfectly secured with sling devices and corner protectors to prevent any movement and friction between the panels. No more than 3 packages of panel will be stacked in height.

For more information, consult with our Hiansa experts. We have more than 40 years of experience in the industry.

Imitation Teja sandwich panel for roofs of residential buildings and industrial buildings

Once the panel is installed, the panel surface must be thoroughly cleaned, eliminating any chip or metal shaving that may cause rust. All metallic and non-metallic objects on the panel surface must also be removed, leaving it completely free of obstacles.

If necessary, the wall will be washed with neutral detergent solution + water.